Foundry Crossover Procedure

Lets figure out what steps we want to take in order to integrate the Foundry switch.

Here is a starting point:

• Connect up all access switches and routers to the Foundry.
• Move srv1-30 and db's onto the first patch.
• Do away with the netgear.
• Move any other servers we want on the Foundry from csw1 to the second patch.
• Disconnect the fiber from csw1 and route a new fiber to the foundry.
• Once the first fiber uplink is established, do the same with the other one.
• Use remaining cisco's as access switches and backup routers.